NYE PRODUKTER ER HER! SJEKK DEM UT.
Butikker Handlevogn

Setting up your system

Follow these steps to set up your system:

Place your speakers

Connect the speaker wires to the Acoustimass® module

Connect the speaker wires to your speakers. The connection will vary as shown, depending on whether you have a V30, V20 or V10 system

Connect the Acoustimass module and the display panel to the media console

Next, select and connect the video and audio connections between your V-class system's media console and your TV, and between the media console and your other home theater devices, such as your DVD player and cable or satellite box. For help making connections, see Connecting an audio/video device

This is an example using an HDMI® cable:

Connect the power supply cords and insert batteries into the remote control

Plug the media console and Acoustimass power supply cords into an electrical outlet

Choosing your display language

The first time you power up your V-class system, the Display Language menu appears.

To select a display language, press the numeric key on the remote control that corresponds with your language preference. These are in numerical order as follows: English, Español, Deutsch, Français, Italiano, Nederlands, Dansk or Svenska.

You can change the display language at any time by pressing the System button on the remote. Press the right arrow to scroll to the Media Center icon, then using the down arrow, select "Display Language."

Using the Setup menu

after powering up your system and selecting the display language, the setup menu appears. you can also select it at any time by pressing the system button on the remote and pressing the right arrow to scroll to the setup icon. the setup menu lets you run the adaptiq audio calibration system and program your remote to control your connected components.